No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.21 hwMgmdHostSGExceedClear

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.21 hwMgmdHostSGExceedClear

Description

MGMD/3/hwMgmdHostSGExceedClear:OID [oid] IGMP or MLD total (S, G) entries can be created because the number of IGMP or MLD total (S, G) entries on the host side fell below the limit. (hwMgmdNotificationAddressType=[integer], hwMgmdHostSGTotalCount=[integer])

The total number of (S, G) entries of all instances fell below the maximum number allowed on the user-side IGMP/MLD device, so new (S, G) entries can be created.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.21

Minor

communicationsAlarm

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

hwMgmdNotificationAddressType

Group address type:
  • 1: IPv4 address

  • 2: IPv6 address

hwMgmdHostSGTotalCount

Maximum limit of total number of (S, G) entries of all instances on the user-side IGMP/MLD device

Impact on the System

Services will not be affected.

Possible Causes

The total number of (S, G) entries of all instances fell below the maximum number allowed on the user-side IGMP/MLD device.

Procedure

  1. This message is informational only, and no action is required.

Related Information

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100034065

Views: 131893

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next