No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IPSEC_1.3.6.1.4.1.2011.6.122.26.6.5 hwIPSecPolicyAttach

IPSEC_1.3.6.1.4.1.2011.6.122.26.6.5 hwIPSecPolicyAttach

Description

IPSEC/4/IPSECPOLICYATTACH: OID [oid] an IPSec policy is applied to an interface. (IfIndex=[interface-index], PolicyName=[policy-name], VsysName=[vsys-name], InterfaceName=[interface-name])

IPSEC/4/IPSECPOLICYATTACH: OID [oid] An IPSec policy is applied to an interface. (IfIndex=[interface-index], PolicyName=[policy-name], VsysName=[vsys-name], InterfaceName=[interface-name])

An IPSec policy is applied to an interface.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.6.122.26.6.5 Warning Communications alarm

Parameters

Name Meaning
oid Indicates the MIB object ID of the alarm.

interface-index

Indicates the index of the interface to which the IPSec policy is applied.

policy-name

Indicates the name of the applied IPSec policy.

vsys-name

Indicates the name of the virtual system to which the IPSec policy belongs.

NOTE:

The device does not support this parameter.

interface-name Indicates the interface name.

Impact on the System

None

Possible Causes

When an IPSec policy is applied to an interface, the alarm is generated.

Procedure

  • This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100034065

Views: 131089

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next