No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Basic Configuration

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modify Parameters

Modify Parameters

Access the Ethernet SubMenu and select 4 to access the Modify Parameters menu.

        Ethernet SubMenu

    1. Update CPLD
    2. Update Software
    3. Display Parameters
    4. Modify Parameters
    5. Save Parameters
    0. Return

Enter your choice(0-5):4
NOTE:
Ftp type define:  0(ftp), 1(tftp),
ENTER = no change; '.' = clear;

Ftp type            : 0
File name           : ar3600.cc
Ethernet ip address : 192.168.1.3
Ethernet ip mask    : 255.255.255.0
Host ip address     : 192.168.1.11
Ftp user            : huawei
Ftp password        : **********

Modify net parameter success.
  • Run TFTP or FTP software on the PC. For details, see the third-party software help.

    You can use FTP or TFTP to set network parameters through this menu. The PC must function as the FTP or TFTP server and connects to the management port of the device, and the PC must be on the same network segment as the device.

  • Set network parameters.

    The parameter values can contain only letters, numerals, underscores, and dots. Blanks are not allowed.

    • Ftp type: Configure the device as the FTP or TFTP client. By default, the device functions as the FTP client.
    • File name: Set the name of the file to be transferred.
    • Ethernet ip address: Set the IP address of the management port.
    • Ethernet ip mask: Set the subnet mask.
    • Host ip address: Set the IP address of the FTP or TFTP server.
    • Ftp user: Set the user name for accessing the FTP server.
    • Ftp password: Set the password for accessing the FTP server.

    If the device uses TFTP to transfer files, press Enter. You do not need to set Ftp user and Ftp password.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100034066

Views: 99561

Downloads: 519

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next