No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Basic Configuration

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the File Server

Configuring the File Server

This section describes how to configure the file server.


The file server works properly.


  • The file server can be an FTP or SFTP server. An SFTP server is recommended.
  • The device or a PC can function as the file server.


Configure the file server.

Follow-up Procedure

After configuring the file server, save the intermediate file (mandatory) and at least one of the configuration file, system software, and patch file to an authorized directory on the file server.

  • Before uploading files to the file server, ensure that the directory has sufficient space to store the files.
  • If a PC functions as the file server, directly copy the files to the authorized directory on the PC (the authorized directory on the file server needs to be specified).
  • If the device functions as the file server, use third-party software on a PC to upload the files to the authorized directory on the file server.
  • To ensure file server security, you are advised to configure a unique user name for the file server and assign read-only permission to the user to prevent unauthorized modification of the files. After the Auto-Start process is complete, disable the file server function.
Updated: 2019-08-08

Document ID: EDOC1100034066

Views: 83812

Downloads: 468

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next