No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Basic Configuration

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Interpreting Command Line Error Messages

Interpreting Command Line Error Messages

If a command is entered and passes syntax check, the system executes it. Otherwise, the system reports an error message.

Table 1-3 lists the common error messages.

Table 1-3  Common error messages of the command line

Error Message

Cause of the Error

Error: Unrecognized command found at '^' position.

No command is found.

No keyword is found.

Error: Wrong parameter found at '^' position.

The parameter type is incorrect.

The parameter value exceeds the limit.

Error: Incomplete command found at '^' position.

The entered command is incomplete.

Error: Too many parameters found at '^' position.

Too many parameters are entered.

Error: Ambiguous command found at '^' position.

Indefinite command is entered.

Updated: 2019-11-21

Document ID: EDOC1100034066

Views: 98178

Downloads: 515

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next