No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Basic Configuration

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Users of Different Levels to View Different Configurations

Configuring Users of Different Levels to View Different Configurations

The device allows users of different levels to view specified configurations, so users can view outputs of specified command lines.


After the administrator runs the command-privilege level command to degrade the level of display current-configuration, low-level users can run the display current-configuration command to view all device configurations.

To allow the low-level users to view the specified configurations, the administrator can run the set current-configuration display command to specify the configurations to be displayed.


  1. Run the system-view command to enter the system view.
  2. Run the command-privilege level level view view-name command-key command to specify the level of the display current-configuration command.
  3. Run the set current-configuration display [ all ] level level command-key command to specify the configuration that a user of a specified level can view.

Verifying the Configuration

Log in to the device as a user of the specified level and run the display current-configuration command.

Updated: 2019-11-21

Document ID: EDOC1100034066

Views: 90541

Downloads: 487

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next