No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Basic Configuration

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Set the Screen Resolution?

How Do I Set the Screen Resolution?

A proper resolution ensures good visual effect.

Procedure

  1. Choose Settings > Display. The PERSONALIZED page is displayed, as shown in Figure 15-10.

    Figure 15-10  Personalized page

  2. Click HDMI setting. Select the screen resolution in the HDMI settings dialog box that is displayed, as shown in Figure 15-11.

    Figure 15-11  HDMI settings dialog box

  3. After the screen resolution is selected, the system displays a dialog box. Click ok. The device restarts immediately. The configured screen resolution takes effect after the device restarts. If you click cancel or do not click ok within 10 seconds, the system restores the original screen resolution.
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100034066

Views: 85509

Downloads: 476

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next