No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Basic Configuration

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modify parameter

Modify parameter

Access the network interface submenu and select 2 to access the modify parameter menu.

        Network Menu

    1. Display parameter
    2. Modify parameter
    3. Save parameter
    4. Download file
    5. Upload file
    0. Return

Enter your choice(0-5):2
NOTE:
Net type define:  0(ftp), 1(tftp),
ENTER = no change; '.' = clear;

Net type            : 0
File name           : cfg.zip
Ethernet ip address : 192.168.1.3
Ethernet ip mask    : ffffff00
Gateway ip address  :
Ftp host ip address : 192.168.1.11
Ftp user            : huawei
Ftp password        : **********

Modify net parameter success.
  • Start the TFTP or FTP software on the PC. (For details, see help document about the third-party software.)

    Use this menu to set network interface parameters in FTP or TFTP mode. The PC must function as the FTP or TFTP server. Ensure that the PC is directly connected to the management interface of the device and can communicate on the same network segment.

  • Set network interface parameters.

    The parameter values can contain only letters, numerals, underlines, and dots. Spaces are not allowed.

    • Net type: FTP client or TFTP client. By default, the device functions as the FTP client.
    • File name: Name of the file to be transferred.
    • Ethernet ip address: IP address of the management interface on the device. By default, the IP address of the management interface is 192.168.1.20.
    • Ethernet ip mask: Subnet mask.
    • Gateway ip address: Gateway IP address.
    • Ftp host ip address: TFTP or FTP server IP address.
    • Ftp user: Name of the user who connects to the FTP server.
    • Ftp password: Password for accessing the FTP server.

    When the device transfers files using TFTP, the Ftp user and Ftp password parameters is not required. You only need to press Enter.

    If the device and server belong to different network segments, the Gateway ip address parameter must be set. If the device and server belong to the same network segment, the Gateway ip address parameter is not required.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100034066

Views: 88731

Downloads: 486

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next