Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Auto-Config Across Different Network Segments
The device that is on a different network segment than the DHCP server can have Auto-Config configured to automatically load the system software, patch file, and configuration file for remote device deployment.
Pre-configuration Tasks
Before configuring Auto-Config on the device that is on a different network segment than the DHCP server, complete the following tasks:
- Ensure that routes between the DHCP server, DHCP relay, file server (FTP/TFTP/SFTP server), and device are reachable.
- Ensure that no startup configuration file exists on the device.
Previous
