No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Basic Configuration

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Startupfile Check Manage

Startupfile Check Manage

Access the startup select submenu and select 4 to access the startup file check manage menu.

                Modify Startup Parameters

    1. Display Current Startup Configuration
    2. Modify Startup Boot File
    3. Modify Startup Configuration File
    4. Startupfile Check Manage
    0. Return

Enter your choice(0-3):4
        File Check Manage

    1. Set SignatureCheck Flag
    2. Clear SignatureCheck Flag
    3. Query SignatureCheck Flag
    0. return

Enter your choice(0-3):1
Set SignatureCheckFlag Success!

        File Check Manage

    1. Set SignatureCheck Flag
    2. Clear SignatureCheck Flag
    3. Query SignatureCheck Flag
    0. return

Enter your choice(0-3):3
StartUp SignatureCheck Flag Exist

        File Check Manage

    1. Set SignatureCheck Flag
    2. Clear SignatureCheck Flag
    3. Query SignatureCheck Flag
    0. return

Enter your choice(0-3):2
Clear SignatureCheckFlag Success!

        File Check Manage

    1. Set SignatureCheck Flag
    2. Clear SignatureCheck Flag
    3. Query SignatureCheck Flag
    0. return

Enter your choice(0-3):3
StartUp SignatureCheck not Exist

To check or modify the system software check configuration, access this menu to manage the system software check.

Select 1. Set SignatureCheck Flag to set the check flag for the digital signature file of the system software. The check flag is used for performing the validity check for the digital signature file of the system software. Select 2. Clear SignatureCheck Flag to cancel the check flag for the digital signature file of the system software. Select 3. Query SignatureCheck Flag to check whether the check flag for the digital signature file of the system software is set.

Translation
Download
Updated: 2019-08-08

Document ID: EDOC1100034066

Views: 84715

Downloads: 474

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next