No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Basic Configuration

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying Command Line Configurations

Verifying Command Line Configurations

After the configurations are complete, you can run the display command to verify the configuration and running information on the device.

For example, after all configurations of the FTP service are complete, you can run the display ftp-server command to check parameters of the FTP server. For details on the usage and functions of the display command, see Checking the Configuration in each feature of the Configuration Guide.

You can also verify the current running configurations and configurations in the current view.
  • Verify the current running configurations:

    display current-configuration

    This command does not display parameters that use default settings.

  • Verify configurations in the current view:

    display this

    This command does not display parameters that use default settings.

    When a user runs the display this command to check configuration information, other users can run this same command only after all the command output is displayed.

Updated: 2019-11-21

Document ID: EDOC1100034066

Views: 88274

Downloads: 486

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next