No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Basic Configuration

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of SMS-based deployment

Overview of SMS-based deployment

This section describes the definition and purpose of SMS-based deployment.


Deployment personnel send deployment short messages to 3G/LTE-supporting devices. The devices then obtain and parse the short messages to activate 3G/LTE links, and obtain and load a configuration file from a file server. This deployment method can implement zero touch deployment of the devices in a batch.


As the number of branches in enterprises keeps increasing, more branch devices need to be deployed on enterprise networks. However, these branch devices cannot be deployed uniformly because they are geographically dispersed and difficult or fail to obtain wired communications resources. As a result, deployment personnel often need to configure software for branch devices one by one onsite, increasing deployment costs and reducing deployment efficiency.

Huawei offers SMS-based deployment function to solve this problem. This function only requires deployment personnel to send deployment short messages to branch devices, which then receive and parse the short messages and connect to enterprise networks in 3G/LTE mode to active 3G/LTE links. Branch devices can work with eSight network management system (NMS) and SMS gateways to obtain a configuration file from a file server and load the files for zero touch deployment in a batch. This function simplifies the deployment process and reduces deployment costs.

Updated: 2019-11-21

Document ID: EDOC1100034066

Views: 85512

Downloads: 476

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next