No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Basic Configuration

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for SMS-based Deployment

Application Scenarios for SMS-based Deployment

This section describes application scenarios for SMS-based deployment.

SMS-based deployment function implements zero touch deployment of devices. When devices are managed by eSight, network administrators can send deployment short messages to devices through eSight to complete zero touch deployment of the devices in a batch.

In Figure 5-2, Branch routers in different locations (such as routers placed within off-bank ATMs) connect to the enterprise headquarters over the Internet through 3G/LTE links. RouterA and RouterB function as egress gateways of enterprise branches, and eSight (with a built-in SFTP server) is deployed on the enterprise headquarters to send deployment short messages to devices.

Figure 5-2  SMS-based deployment through eSight

Onsite installation personnel install devices and then send device information to enterprise network administrators. According to the received device information, the administrators send deployment short messages to devices through eSight. Devices receive and parse the short messages, connect to eSight over the 3G/LTE network, and download as well as load a configuration file from a file server. This method implements device registration and zero touch deployment. After device deployment is completed, the administrators can upgrade these devices or deploy other services on these devices through eSight.

Updated: 2019-08-08

Document ID: EDOC1100034066

Views: 83578

Downloads: 466

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next