No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Basic Configuration

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for USB-based Deployment

Licensing Requirements and Limitations for USB-based Deployment

Involved Network Elements


Licensing Requirements

USB-based deployment is a basic feature of a router and is not under license control.

Feature Limitations

  • This deployment mode can only be used in SD-WAN solutions. The devices with dual SRUs do not this deployment mode.

  • To ensure data security, it is recommended that the device administrator use a key encryption or fingerprint encryption USB flash drive and keep the USB flash drive containing the deployment configuration file safe. After the deployment is complete, delete the deployment configuration file in time.

  • When using an interface on an LPU for streamlined USB-based deployment, insert a USB flash drive for deployment after the LPU is registered successfully. Otherwise, you need to restart the device and then deploy it. During the deployment, determine the LPU registration status and deployment status based on the indicator status.

  • After the deployment is complete, ensure that the devices are deployed based on the mapping between ESNs and sites. Otherwise, the network between the devices and Agile Controller may be unreachable.

  • During USB-based deployment, if there is system software in deployment files, the CPU usage may become high temporarily. The CPU usage will automatically return to the normal range, without requiring any action.

Updated: 2019-08-08

Document ID: EDOC1100034066

Views: 85171

Downloads: 474

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next