No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Basic Configuration

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Configure Display Settings?

How Do I Configure Display Settings?


The Display settings dialog box provides three options: Lock aspect ratio, Stretch to full screen, and Manual.
  • Lock aspect ratio: A page is displayed in the normal aspect ratio. Most televisions use this mode.
  • Stretch to full screen: This mode applies to displays. A page is displayed in full screen mode. If the page is not displayed in full screen mode or cannot be displayed clearly, select this mode to adjust the display effect.
  • Manual: You can manually adjust the display effect based on the display or television.
Configure display settings based on the actual situation.


  1. Choose Settings > Display. The PERSONALIZED page is displayed, as shown in Figure 15-12.

    Figure 15-12  Personalized page

  2. Click Display settings. Set the display in the Display settings dialog box that is displayed.

    • If you select Lock aspect ratio or Stretch to full screen, the configuration takes effect immediately.
    • If you select Manual, go to 3.
    Figure 15-13  Display settings dialog box

  3. Click Manual. The Screnn resize dialog box is displayed. Set the width and height based on actual display requirements, and click OK, as shown in Figure 15-14. The configuration takes effect.

    Figure 15-14  Screen resize dialog box

What If the Page Is Not Displayed in Full Screen or Cannot Be Displayed Clearly?

The solution is as follows:

  1. Select Stretch to full screen to adjust the display effect.
  2. If the image is beyond the display range after you select Stretch to full screen, the problem is caused by the display device. In this case, you can adjust the display device. The adjustment methods vary according to different display devices. Make correct adjustments according to the specific model.
Updated: 2019-11-21

Document ID: EDOC1100034066

Views: 90159

Downloads: 487

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next