No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Basic Configuration

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Password of the Compressed Configuration File for USB-based Deployment

Setting the Password of the Compressed Configuration File for USB-based Deployment

Context

If the configuration file osp_settings.zip is used for USB-based deployment, the password for the configuration file osp_settings.zip must be the same as the password of the compressed configuration file for USB-based deployment in the Android OS on the device; otherwise, the USB-based deployment fails. In the first USB-based deployment, if the device does not contain the password of the compressed configuration file for USB-based deployment in the Android OS or the password is forgotten, you need to perform the following operations to set the password.

Procedure

  1. Choose Settings > Security. The Security page is displayed, as shown in Figure 15-7.

    Figure 15-7  Security page

  2. Click Set password for compression profiles. In the dialog box that is displayed, enter the Android OS login password and the password of the compressed configuration file for USB-based deployment in the Android OS, and click OK, as shown in Figure 15-8.

    Figure 15-8  Setting the password of the compressed configuration file for USB-based deployment

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100034066

Views: 98751

Downloads: 517

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next