No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring OSPF Fast Convergence

Configuring OSPF Fast Convergence

By adjusting OSPF timers, you can implement OSPF fast network convergence.

Pre-configuration Tasks

Before configuring OSPF fast convergence, complete the following tasks:

  • Configuring a link layer protocol

  • Configuring IP addresses for interfaces to ensure that neighboring nodes are reachable at the network layer

  • Configuring Basic OSPF Functions

Configuration Procedure

Perform one or more configuration tasks (excluding the task of Verifying the OSPF Fast Convergence Configuration) as required.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034072

Views: 111295

Downloads: 163

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next