No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of RIPng

Overview of RIPng

Routing Information Protocol next generation (RIPng) is a simple Interior Gateway Protocol (IGP). It is the extension of RIP on IPv6 networks. RIPng applies to small-scale networks, such as campus networks and regional networks with simple structure. RIPng is widely used on networks because of its simple implementation and ease of configuration and maintenance compared to OSPFv3 and IS-IS for IPv6.

NOTE:

RIPng does not have the security authentication mechanism. For security purposes, configure OSPFv3, BGP4+, or IPv6 IS-IS.

Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034072

Views: 114102

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next