No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling Zero Field Check for RIPng Packets

Enabling Zero Field Check for RIPng Packets

Context

In a RIPng packet, some fields must be zero. These fields are called zero fields. When receiving a packet, a RIPng process checks the zero fields of the packet. If the value of a zero field in the packet is not 0, the RIPng process discards the packet.

Enabling zero field check on RIPng Update packets can improve network security.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ripng [ process-id ] [ vpn-instance vpn-instance-name ]

    The RIPng view is displayed.

  3. Run checkzero

    Zero field check is enabled for RIPng packets.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034072

Views: 111248

Downloads: 163

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next