No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Static Routes

Overview of Static Routes

Definition

A static route is a route that, in most cases, the network administrator manually configures to allow network traffic to reach a target destination.

Purpose

Static routes are used in different ways on different types of network.

  • On simple networks, static routes can be used alone, without the need for dynamic routes.

  • On complex networks, static routes can be used alongside dynamic routes to improve network performance and ensure bandwidth is available for important applications.

  • Static routes associated with VPN instances are used to manage VPN routes.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034072

Views: 111139

Downloads: 163

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next