No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configurations

Checking the Configurations

After BFD for OSPFv3 is configured, you can check information about the BFD session.

Prerequisites

The BFD is enabled and configured for OSPFv3.

Procedure

  • Run the display ospfv3 [ process-id ] bfd session [ interface-type interface-number ] [ neighbor-id ] [ verbose ] command to check the BFD session information.
Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034072

Views: 116546

Downloads: 172

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next