No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring BFD for OSPFv3

Configuring BFD for OSPFv3

If there are high requirements for data transmission, and OSPFv3 convergence needs to be speeded up when the link status changes, you can configure BFD on OSPFv3 links. After detecting a link failure, BFD notifies the routing protocol of the failure, which triggers fast convergence. When the neighbor relationship is Down, the BFD session is deleted dynamically.

Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034072

Views: 116603

Downloads: 172

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next