No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Basic OSPF Function Configuration

Verifying the Basic OSPF Function Configuration

Prerequisites

All configurations of basic OSPF functions are complete.

Procedure

  • Run the display ospf [ process-id ] peer command in any view to check information about OSPF neighbors.
  • Run the display ospf [ process-id ] interface command in any view to check information about OSPF interfaces.
  • Run the display ospf [ process-id ] routing command in any view to check information about the OSPF routing table.
  • Run the display ospf [ process-id ] lsdb command to check information in the OSPF LSDB.
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034072

Views: 111319

Downloads: 163

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next