No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the RIPng Network Performance Optimization Configuration

Verifying the RIPng Network Performance Optimization Configuration

Procedure

  • Run the display ripng [ process-id ] command to check the configuration of the RIPng process.
  • Run the display ripng process-id database [ verbose ] command to check all activated routes in the RIPng database.
  • Run the display ripng process-id interface [ interface-type interface-number ] [ verbose ] command to check information about the RIPng interface.
  • Run the display ripng process-id neighbor [ verbose ] command to check information about RIPng neighbors.
  • Run the display ripng process-id route command to check all the RIPng routes that are learned from other routers.
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034072

Views: 109489

Downloads: 155

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next