No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of BGP

Overview of BGP

Definition

The Border Gateway Protocol (BGP) is a path vector protocol that allows devices between Autonomous Systems (ASs) to communicate and selects optimal routes. BGP-1, BGP-2, and BGP-3 are three earlier versions of BGP. BGP-4 has been used since 1994. Since 2006, unicast IPv4 networks have been using BGP-4, and other networks (such as IPv6 networks) have been using MP-BGP.

MP-BGP is an extension of BGP-4 and applies to different networks; however, the original message exchange and routing mechanisms of BGP-4 are not changed. MP-BGP applications on IPv6 unicast and IPv4 multicast networks are called BGP4+ and Multicast BGP (MBGP) respectively.

Purpose

A network is divided into different ASs to facilitate the management over the network. In 1982, the Exterior Gateway Protocol (EGP) was used to dynamically exchange routing information between ASs. EGP advertises only reachable routes but not select optimal routes or prevent routing loops. Therefore, EGP cannot meet network management requirements.

BGP was designed to replace EGP. Different from EGP, BGP can select optimal routes, prevent routing loops, transmit routing information efficiently, and maintain a large number of routes.

Although BGP is used to transmit routing information between ASs, BGP is not the best choice in some scenarios. For example, on the egress connecting a data center to the Internet, static routing instead of BGP is used to prevent a huge number of Internet routes from affecting the data center internal network.

Benefits

BGP ensures high network security, flexibility, stability, reliability, and efficiency:
Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034072

Views: 113964

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next