No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of OSPF

Overview of OSPF

Definition

The Open Shortest Path First (OSPF) protocol, developed by the Internet Engineering Task Force (IETF), is a link-state Interior Gateway Protocol (IGP).

At present, OSPF Version 2, defined in RFC 2328, is intended for IPv4, and OSPF Version 3, defined in RFC 2740, is intended for IPv6. Unless otherwise stated, OSPF stated in this document refers to OSPF Version 2.

Purpose

Before the emergence of OSPF, the Routing Information Protocol (RIP) is widely used on networks as an IGP.

RIP is a routing protocol based on the distance vector algorithm. Due to its slow convergence, routing loops, and poor scalability, RIP is gradually replaced by OSPF.

As a link-state protocol, OSPF can solve many problems encountered by RIP. Additionally, OSPF features the following advantages:

  • Receives or sends packets in multicast mode to reduce load on the Router that does not run OSPF.

  • Supports Classless Interdomain Routing (CIDR).

  • Supports load balancing among equal-cost routes.

  • Supports packet encryption.

With the preceding advantages, OSPF is widely accepted and used as an IGP.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034072

Views: 109419

Downloads: 155

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next