No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Prohibiting an OSPF Interface from Sending and Receiving OSPF Packets

Prohibiting an OSPF Interface from Sending and Receiving OSPF Packets

Context

You can prohibit an OSPF interface from sending and receiving OSPF packets to prevent local OSPF routing information from being obtained by devices on other networks. This restriction also prevents the local device from receiving the routing update information advertised by other devices on the same network.

After an OSPF interface is prohibited from sending and receiving OSPF packets, the interface can still advertise its direct routes, but not Hello packets. Therefore, no neighbor relationship can be set up between the device and its neighbor. The OSPF network becomes more adaptive and network resources are saved.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ospf [ process-id ]

    The OSPF view is displayed.

  3. Run silent-interface { all | interface-type interface-number }

    An OSPF interface is prohibited from sending and receiving OSPF packets.

    By default, an interface is allowed to send and receive OSPF packets.

    You can prohibit an interface from sending and receiving OSPF packets in different OSPF processes, but the silent-interface command is valid only for the OSPF interface in the local process.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034072

Views: 111013

Downloads: 163

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next