Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Static LSP Configuration
You can set up a static label switched path (LSP) by manually allocating labels to label switching routers (LSRs). Static LSPs apply to networks with simple and stable network topologies.
- Overview of Static LSPs
Static LSPs are manually set up by an administrator and apply to networks with simple and stable network topologies. They cannot be set up using a label distribution protocol. - Licensing Requirements and Limitations for Static LSPs
- Default Settings for Static LSPs
- Configuring Static LSPs
- Maintaining Static LSPs
- Configuration Examples for Static LSPs
