Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MPLS LDP Configuration
This chapter describes how to configure Multiprotocol Label Switching Label Distribution Protocol (MPLS LDP). MPLS LDP defines the messages and procedures for distributing labels. MPLS LDP is used by Label Switching Routers (LSRs) to negotiate session parameters, distribute labels, and then establish Label Switched Paths (LSPs).
- Overview of MPLS LDP
- Understanding MPLS LDP
- Summary of MPLS LDP Configuration Tasks
After basic functions of MPLS LDP are configured, you can build an MPLS network using LDP. To ensure network reliability and security, you need to perform other configuration in addition to MPLS LDP. - Licensing Requirements and Limitations for MPLS LDP
- Default Settings for MPLS LDP
- Configuring MPLS LDP
- Maintaining MPLS LDP
- Configuration Examples for MPLS LDP
- Troubleshooting MPLS LDP
- FAQ About MPLS LDP
This section describes the FAQ about MPLS LDP.