Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Examples for MPLS LDP
- Example for Configuring Local LDP Sessions
- Example for Configuring Remote MPLS LDP Sessions
- Example for configuring automatic triggering of a request for
a Label Mapping message in DoD mode
- Example for Configuring a Policy for Triggering LSP Establishment
- Example for Configuring a Policy for Triggering Transit LSP
Establishment
- Example for Disabling Devices from Distributing LDP Labels
to Remote Peers
- Example for Configuring Static BFD to Detect LDP LSPs
- Example for Configuring Dynamic BFD to Detect LDP LSPs
- Example for Configuring Synchronization Between LDP and Static
Routes
- Example for Configuring Synchronization Between LDP and IGP
- Example for Configuring LDP GR
- Example for Configuring Manual LDP FRR
- Example for configuring LDP auto FRR
- Example for Configuring an LDP Inbound Policy
- Example for Configuring an LDP Outbound Policy
- Example for Configuring LDP GTSM
- Example for configuring LDP extension for inter-area LSP
- Example for Configuring LDP over GRE