Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting the Tunnel Interface
Context
To make the tunnel-related configuration take effect, you can run the mpls te commit command in the tunnel interface view and run the reset command in the user view.
If the configuration is modified in the interface view of the TE tunnel but the mpls te commit command is not configured, the system cannot execute the reset mpls te tunnel-interface tunnel command to re-establish the tunnel.