Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Congestion Avoidance
Pre-configuration Tasks
After congestion avoidance is configured, the device discards excess packets based on the configured drop profile to adjust the network traffic and solve the network overload problem.
Before configuring
congestion avoidance, complete the following tasks:
Configure priority mapping.
Configure priority re-marking based on traffic classifiers.
Configure congestion management.
