This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Which Scheduling Modes Do LAN-Side Boards and WAN-Side Boards
Support?
Which Scheduling Modes Do LAN-Side Boards and WAN-Side Boards
Support?
Table 4-5 Scheduling modes supported by each interface
Interface
Scheduling Mode
LAN interface
PQ
DRR
WRR
PQ+DRR
PQ+WRR
NOTE:
Layer 2 interfaces on the AR150&AR160
(except the AR161, AR161EW, AR161EW-M1, AR161G-L, AR161G-Lc, AR161W,
AR169, AR169CVW, AR169CVW-4B4S, AR169JFVW-4B4S, AR169JFVW-2S, AR169EGW-L,
AR169EW, AR169G-L, AR169-P-M9, AR169RW-P-M9 and AR169W-P-M9)&AR200 series
support only PQ, WRR, and PQ+WRR, but do not support DRR.
Layer 2 interfaces on the AR1200 (except
the AR1220C, AR1220F, AR1220E, AR1220EV, AR1220EVW and AR1220-8GE) series SRU support only PQ, WRR, and PQ+WRR, but do not support
DRR.
Layer 2 VE interfaces only support PQ, WFQ and PQ+WFQ.