No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Reliability

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides guidance for configuring reliability services, including interface backup, BFD, VRRP, and EFM.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of BFD

Overview of BFD

This section describes Bidirectional Forwarding Detection (BFD).

Definition

BFD is a unified detection mechanism used to quickly detect link faults and monitor IP connectivity.

Purpose

A network device must detect communications faults between adjacent devices quickly so that the upper layer protocol can rectify the fault and prevent service interruption. In practice, hardware detection is used to detect link faults while applications use the Hello mechanism of upper-layer routing protocols to detect faults. However, not all media are equipped with a hardware detection mechanism and the Hello mechanism may be too slow for some applications.

BFD addresses these issues and provides fast fault detection independent of media and routing protocols. BFD is useful because it can:

  • Quickly detect link faults between neighboring network devices. The detected faults may occur on interfaces, data links, or forwarding engines.

  • Provide uniform detection for all media and protocol layers in real time.

Benefits

With BFD, you can improve network performance and adjacent systems can quickly detect communication faults so that a standby channel can be created immediately to restore communications and ensure network reliability.

Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034076

Views: 56618

Downloads: 105

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next