No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Reliability

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides guidance for configuring reliability services, including interface backup, BFD, VRRP, and EFM.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the BFD Configuration

Verifying the BFD Configuration

Procedure

  • Run the display bfd interface [ interface-type interface-number ] command to verify the BFD-enabled interface.
  • Run the display bfd session { all | static | discriminator discr-value | dynamic | peer-ip { default-ip | peer-ip [ vpn-instance vpn-instance-name ] } | static-auto } [ verbose ] command to view information about the BFD session.
  • Run the display bfd session { all | static | peer-ipv6 peer-ipv6 [ vpn-instance vpn-instance-name ] } [ verbose ] command in any view to check information about a BFD for IPv6 session.
  • Run the display bfd statistics command to verify global BFD statistics.
  • Run the display bfd statistics session { all | static | dynamic | discriminator discr-value | peer-ip default-ip | peer-ip peer-ip [ vpn-instance vpn-name ] | static-auto } command to verify BFD session statistics.
  • Run the display bfd statistics session { all | static } for-ipv6 or display bfd statistics session peer-ipv6 peer-ipv6 [ vpn-instance vpn-instance-name ] command in any view to check statistics about a BFD for IPv6 session.
Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034076

Views: 60757

Downloads: 109

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next