No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Reliability

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides guidance for configuring reliability services, including interface backup, BFD, VRRP, and EFM.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for Y.1731

Application Scenarios for Y.1731

When the AR is used as the enterprise access device, it can connect to PE1 through a Layer 2 link and to PE2 remotely. The AR provides VLAN-based Y.1731 performance monitoring, including two-way delay measurement and single-ended SLM.

Figure 10-6  Application Scenarios

In Figure 10-6, create MDs and MAs on PE1 and PE2. After Y.1731 performance monitoring is configured between PE1 and PE2, PE1 and PE2 send SL frames and single-ended SLM is performed based on the counter value in packets. PE1 and PE2 exchange DM frames, so the bidirectional delay can be counted based on the interval of packets. Then the delay variation can be counted based on the delay.

Updated: 2019-08-12

Document ID: EDOC1100034076

Views: 59962

Downloads: 107

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next