No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Reliability

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides guidance for configuring reliability services, including interface backup, BFD, VRRP, and EFM.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Interface Backup in Active/Standby Mode

Interface Backup in Active/Standby Mode

As shown in Figure 2-1, Interface1 is the primary interface, and Interface2 and Interface3 are backup interfaces. In active/standby mode, only one interface transmits services at any time.
  • When the primary interface Interface1 works properly, Interface2 and Interface3 do not transmit services.

  • The router monitors the interface status. When the primary interface Interface1 fails, a backup interface with the highest priority starts to transmit services.

  • When the primary interface Interface1 is restored, traffic is switched back to the primary interface Interface1.

Figure 2-1  Interfaces working in active/standby mode

NOTE:

Interface backup in active/standby mode can only detect faults on a directly connected link. When the upstream indirectly connected link of the primary interface is faulty, the interface backup module cannot detect the fault, causing service interruption. To monitor the status of the entire link, associate interface backup in active/standby mode with NQA, BFD, or routing.

Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034076

Views: 59473

Downloads: 107

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next