No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the NAC Alarm Report Function

Configuring the NAC Alarm Report Function

Context

You can configure the NAC alarm report function, which helps you obtain real-time running status of the NAC network and facilitates operation and maintenance.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run snmp-agent trap enable feature-name mid_eapol [ trap-name { hwmacauthenmaxuseralarm | hwsrvcfgeapmaxuseralarm } ]

    The trap function is enabled for the DOT1X module.

    By default, the trap function is enabled for the DOT1X module.

  3. Run snmp-agent trap enable feature-name mid_web [ trap-name { hwportalmaxuseralarm | hwportaluserclearalarm | hwportalserverdown | hwportalserverup } ]

    The trap function is enabled for the web authentication module.

    By default, the trap function is enabled for the web authentication module.

Verifying the Configuration

  • Run the display snmp-agent trap feature-name mid_eapol all command to check information about all traps on the DOT1X module.

  • Run the display snmp-agent trap feature-name mid_web all command to check information about all traps on the web authentication module.

Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100034077

Views: 137000

Downloads: 244

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next