No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Security

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the Deep Security Function

Enabling the Deep Security Function


To use the IPS or URL filtering function, you need to purchase a license and run the engine enable command to enable the deep security function.

To disable deep security, run the undo engine enable command, and restart the device. After the device restarts, the deep security configurations are deleted.


  1. Run system-view

    The system view is displayed.

  2. Run engine enable

    The deep security function is enabled.

    By default, the system disables the deep security function.


    If the engine enable command is executed for the first time, you need to run the update restore sdb-default command to manually load the signature file.

Updated: 2019-08-07

Document ID: EDOC1100034077

Views: 136015

Downloads: 244

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next