No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Security

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Forcing Users to Go Offline

Forcing Users to Go Offline


You can force online users to go offline by specifying the domain name or interface. This function is applicable to situations such as when the online users are unauthorized, the number of online users reaches the maximum, or the AAA configurations are modified. For example, when you modify the AAA configurations of online users, the new AAA configurations take effect on these users only after you force them to go offline.

  • If you delete the AAA configuration of online users, the users may be forced to go offline.


  • Run the cut access-user { domain domain-name | interface interface-type interface-number [ vlan vlan-id [ qinq qinq-vlan-id ] ] | ip-address ip-address [ vpn-instance vpn-instance-name ] | mac-address mac-address | service-scheme service-scheme-name | access-slot slot-id | ssid ssid-name | user-group group-number | user-id begin-number [ end-number ] | username user-name } or cut access-user access-type { admin [ ftp | ssh | telnet | terminal | web ] | ppp | l2tp } [ username user-name ] command in the AAA view to disconnect one or more sessions. After a session of a user is disconnected, the user is forced to go offline.
Updated: 2019-08-07

Document ID: EDOC1100034077

Views: 128283

Downloads: 231

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next