No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applying an ACL to SNMP to Filter NMSs

Applying an ACL to SNMP to Filter NMSs

To control which NMSs can access a device, you can apply an ACL to the SNMP module.

In Figure 5-5, to manage the remote Router conveniently, the administrator configures the SNMP agent service on the Router so that the agent can report the Router's status to the NMS in a timely manner and the NMS can remotely control the Router. In addition, an ACL-based NMS access right control is configured to allow only the trusted NMS (NMS2) to manage the Router.

Figure 5-5  Applying an ACL to SNMP to filter NMSs

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034077

Views: 113049

Downloads: 208

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next