No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Security

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking PKI Information

Checking PKI Information


During routine maintenance, you can view PKI information in the corresponding view, including information about certificate.


  • Run the display pki certificate enroll-status [ realm realm-name ] command to check the certificate enrollment status.
  • Run the display pki cmp statistics [ session session-name ] command to check CMP session statistics.
  • Run the display pki ocsp cache statistics command to check statistics about the OCSP response cache.
  • Run the display pki ocsp server down-information command to check the OCSP server Down records.
  • Run the display pki certificate { ca | local | ocsp } realm realm-name command to check the content of CA, local, or OCSP server certificate loaded on the device.
  • Run the display pki certificate default { ca | local } command to check the default CA certificate and local certificate.
  • Run the display pki peer-certificate { name peer-name | all } command to check the imported peer certificates.
  • Run the display pki ocsp cache detail command to check the detail information of the OCSP cache.
Updated: 2019-08-07

Document ID: EDOC1100034077

Views: 137495

Downloads: 244

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next