No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating an Interzone

Creating an Interzone

Context

Any two zones form an interzone. Each interzone has an independent interzone view. Most firewall configurations are performed in the interzone views. After the firewall function is configured, the device checks data transmitted between zones.

In an interzone, data is transmitted in the inbound or outbound direction.
  • Inbound: Data flows from a zone with lower priority to a zone with higher priority.
  • Outbound: Data flows from a zone with higher priority to a zone with lower priority.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run firewall interzone zone-name1 zone-name2

    An interzone is created.

    The zones specified for an interzone must have been created on the device.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034077

Views: 112112

Downloads: 204

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next