No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Security

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing HACA Statistics

Clearing HACA Statistics


Before collecting statistics within a certain period for fault locating, clear existing statistics.

The HACA statistics cannot be restored after being cleared. Confirm your operation before clearing the HACA statistics.


  • Run the reset haca-server statistics { all | message | packet [ register | accounting | authentication | authorization | user-syn | cut-notify | cut-request ] } [ template template-name ] command in the user view to clear HACA statistics.
  • Run the reset haca-server accounting-stop-packet all command in the user view to clear the remaining buffer information of HACA accounting-stop packets.
Updated: 2019-08-07

Document ID: EDOC1100034077

Views: 135257

Downloads: 244

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next