No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Security

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Gratuitous ARP Packet Sending

Gratuitous ARP Packet Sending

As shown in Figure 11-6, an attacker forges the gateway address to send a bogus ARP packet to UserA. UserA then records an incorrect ARP entry for the gateway. As a result, the gateway cannot receive packets from UserA.

Figure 11-6  Bogus gateway attack

To avoid the preceding problem, configure gratuitous ARP packet sending on the gateway. Then the gateway sends gratuitous ARP packets at intervals to update the ARP entries of authorized users so that the ARP entries contain the correct MAC address of the gateway.

Updated: 2019-08-07

Document ID: EDOC1100034077

Views: 125748

Downloads: 230

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next