No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Are the 802.1x Users' IP Addresses Not Displayed After I Run the Display Access-User Command?

Why Are the 802.1x Users' IP Addresses Not Displayed After I Run the Display Access-User Command?

The device learns the IP address of an authenticated online user from ARP packets that the user sends. If the user does not send any ARP packets, the device cannot learn or display the user's IP address.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034077

Views: 112471

Downloads: 206

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next