No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an HSB Group

Configuring an HSB Group

Context

An HSB group instructs service modules to perform batch backup, real-time backup, and status synchronization. The backup of services depends on the status negotiation and event notification mechanisms provided by the HSB group, synchronizing services on the master and backup devices.

An HSB group synchronizes backup information and responds to link status changes through the HSB channel established by the HSB service. To make the HSB group work properly, bind an HSB service to the HSB group. In addition, the HSB group must be bound to a VRRP group to negotiate the service status based on the VRRP status. By monitoring the changes in the bound HSB channel status and VRRP status, the HSB group instructs service modules to perform batch backup, real-time backup, and status synchronization.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run hsb-group group-index

    An HSB group is created and the HSB group view is displayed.

    By default, no HSB group is created.

  3. Run bind-service service-index

    An HSB service is configured for binding to the HSB group.

    By default, no HSB service is bound to an HSB group.

  4. Run track vrrp vrid virtual-router-id interface interface-type interface-number

    A VRRP group is configured for binding to the HSB group.

    By default, no HSB group is bound to a VRRP group.

  5. Run quit

    The system view is displayed.

  6. (Optional) Run hsb-service-type firewall hsb-group group-index

    The firewall service is bound to the HSB group

    NOTE:

    STP, VRRP, and MTU cannot be configured on the HSB link.

    Bind firewall service to an HSB group before enabling the HSB group.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034077

Views: 112526

Downloads: 206

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next