No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Security

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Using an ACL to Control Telnet Login Rights

Using an ACL to Control Telnet Login Rights

To allow only specified Telnet clients to access a Telnet server, you can apply an ACL to the Telnet module.

In Figure 5-4, to manage the remote Telnet server conveniently, the administrator configures AAA authentication on the Telnet server. Only the Telnet users passing the AAA authentication can log in to the server. In addition, an ACL-based login control policy is configured on the server so that only the administrator's PC can log in to the server.

Figure 5-4  Using an ACL to control Telnet login rights

Updated: 2019-08-07

Document ID: EDOC1100034077

Views: 137500

Downloads: 244

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next