No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Is the Relationship Between the permit/deny Rules in an ACL and Those in the Behavior of a Traffic Policy?

What Is the Relationship Between the permit/deny Rules in an ACL and Those in the Behavior of a Traffic Policy?

An ACL is usually used with a traffic policy. A traffic policy includes the traffic classifier that meets the requirement of an ACL and a traffic behavior, such as permit/deny.

The permit/deny rules in an ACL and a behavior in the traffic policy are used as follows.
Table 5-22  Usage of permit/deny rules in an ACL and in a behavior

ACL

Behavior in a Traffic Policy

Action Taken for Matching Packets

permit

permit

permit

permit

deny

deny

deny

permit

deny

deny

deny

deny

NOTE:

The traffic policy module permits packets by default. If you just want to block mutual access between network segments, you only need to define the characteristics of the packets to be denied in the ACL. If you add rule permit at the bottom of the ACL, the packets that do not match previous rules will match the last rule. In addition, if the traffic behavior is set to deny, the device discards all packets matching rule permit. As a result, all services are interrupted.

Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100034077

Views: 125390

Downloads: 228

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next