No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Port Security

Configuring Port Security

Port security changes the dynamic MAC addresses learned on an interface into secure MAC addresses (including dynamic and sticky MAC addresses). This function prevents unauthorized users from communicating with the router using this interface and therefore enhances device security.

Pre-configuration Tasks

Before configuring port security, complete the following tasks:
  • Disable MAC address limiting on the interface.
  • Disable MUX VLAN.
  • Disable MAC address authentication.
  • Disable 802.1x authentication.
  • Disable MAC address security for DHCP snooping on the interface.
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034077

Views: 112883

Downloads: 208

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next